These studs should be used to replace existing studs that may not be long enough for a particular wheel fitment or wheel/spacer assembly. They can also be used for a stud conversion if required for a motor sport application or to replace existing studs

 

The studs are mounted through the back of the wheel hub and the spline diameter and thread length can be seen on the below application list. The vehicle makes listed are only a guide.

 

You can drill out the original stud mounting holes so that a stud with a larger spline diameter can be fitted.

 

Please check carefully when ordering/Supplying/fitting any studs. We strongly recommend that a qualified mechanic carries out any stud conversion or stud installation work.